CODE | DESCRIPTION | PROBLEM |
---|
12 | Low Battery | Battery voltage on processor board has dropped below 2.9 volts DC |
21 | Coin-In Tilt | Optic coin-in sensors were blocked |
3100 | Extra Coin Out | Stuck/jammed coin in hopper or optic sensor detects extra coin paid |
3200 | Coin-Out Tilt | Hopper coin-out sensor was blocked |
3300 | Hopper Empty | Hopper coin-out sensor sensor detects no coins were dispensed for 8 seconds or more. Hopper needs to be refilled with coins/tokens. |
41 | Reel #1 | Tilt Designated reel is misaligned or malfunctioning |
42 | Reel # 2 Tilt | Designated reel is misaligned or malfunctioning |
43 | Reel #3 | Tilt Designated reel is misaligned or malfunctioning |
44 | Reel #4 | Tilt Designated reel is misaligned or malfunctioning |
45 | Reel #5 Tilt | Designated reel is misaligned or malfunctioning |
49 | Reel Mechanism Disconnected | A reel mechanism has become unplugged or the circuit is interrupted |
61 | CMOS RAM | Bad CMOS RAM data or data was cleared |
62-0 | Bad Game EPROM | Game program or data program check |
62-1 | Bad Data EPROM | Bad EPROM data |
63 | Processor Tray Open | Main processor door has been opened and closed since last game played |
65-0 | Bad EEPROM Device | Processor could not successfully read from or write to chip |
65-1 | Bad EEPROM Data | Data is invalid or corrupted |
65-2 | Game Type Mismatch | Game data om CMOS RAM does not match game data in EEPROM |
66 | Game EPROM Changed | Machine senses the game EPROM has been changed |
67 | Data EPROM Changed | Machine senses the data EPROM has been changed |
68 | Non-Compatible Data EPROM | Data EPROM is not a standard file |
99-1 | Bill Validator | Stacker jam |
99-2 | Bill Validator | Cash box removed |
99-4 | Bill Validator | Cash box full |
99-5 | Bill Validator | Hardware error |
99-6 | Bill Validator | Reverse bill detected |